The image is watercolored using liquid ink and artist brush.
Stickles was applied to the flower center.
The pearls were attached with AleeneÂ’s Paper Glaze.
Spellbinder – Nestabilities and Frameabilities were used to cut the panels and the circle panel is mounted with foam pop ups.
The out of the box image using Nestabilities: a pictorial can be viewed on my blog in this link if you need photos and IÂ’ll explain how I achieved the technique for those that donÂ’t wish to leave SCS for directions: Lie the Nestabilities die cut side up over the image and mark with a pencil on each side of the image that will be out of the box (youÂ’re marking on the inside of the die cut) and also make a couple small marks on the top or bottom for easy die cut line up. Cut the image slightly further than the mark to allow for the thickness of the metal. Flip the die over and slide it under the portion which was just cut and secure with repositional tape if needed (I use the blue painters tape). Run through the machine to cut then emboss and remove the die cut, erase the pencil marks and itÂ’s ready to color. I color after cutting just in case I make a mistake.
The envelope was dry embossing with a folder from the Pop Culture set and two lines were embossed using the Scor-Pal.