Splitcoaststampers.com - the world's #1 papercrafting community
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
Hi, I found the word document you posted but I can not open....could you email it to me? [email protected] or [email protected].
Thank you, I love this product and it would be awesome to see what else I can do with it.
I'm new at this, and bought this product out of curiosity. Can you email the doc to me as well so that I can learn my options? I'm at [email protected]. Thanks!
I'd love a copy too... I know there are more uses than what I'm using it for... please, please, please forward a copy to me! [email protected] Thanks so much in advance!!!
Hi, I found the word document you posted but I can not open....could you email it to me? [email protected] or [email protected].
Thank you, I love this product and it would be awesome to see what else I can do with it.
You have email
__________________ Proud to be a Stampin' Up! Demo... and a "Rubber Mutt"
I'm new at this, and bought this product out of curiosity. Can you email the doc to me as well so that I can learn my options? I'm at [email protected]. Thanks!
Arriving shortly
__________________ Proud to be a Stampin' Up! Demo... and a "Rubber Mutt"
I'd love a copy too... I know there are more uses than what I'm using it for... please, please, please forward a copy to me! [email protected] Thanks so much in advance!!!
You have email
__________________ Proud to be a Stampin' Up! Demo... and a "Rubber Mutt"
Reprinting it here so that those who cannot open the file might also have access to this great resource
Crystal Effects
(Also known as 3-D Crystal Lacquer)
Crystal Effects is water based, easy to clean up and is an easy way to enhance any rubber stamped art project. Best of all you can apply Crystal Effects to areas you would like to looked raised whether it be on paper or plastic!
Tips for using this product are:
* Prior to use, at least 5 minutes, I place the bottle upside down in a coffee cup, letting all of the air bubbles rise to the top, which now is really the bottom of the bottle.
* Once I start slowly applying the Crystal Effects, I try to NOT pick the tip up off of my project until it is completely covered. Viola . . . no air bubbles. For me, the key is move slooooooowly. It may take you a little longer to get all of you work covered, but the outcome, to me, is well worth it!
Other Ideas for Use:
Besides using Crystal Effects straight from the bottle to give a raised effect, there are other ways to use it.
#1: Layer it on with a paintbrush to give a smooth glass-like finish.
Spot Gloss: Apply a thick layer of Crystal Effects directly to the stamped image with the applicator tip. Let dry completely (about 30 - 60 minutes) before handling.
All-Over Gloss: Use a paintbrush to apply a thin, even coat of Crystal Effects to the entire image. Let dry (about 3-5 minutes).
#2: It is just one of the products I like to use for sealing my Shrink Art Pins.
#3: After applying it to an image, sprinkle a little Dazzling Diamonds glitter on top. This is great for adding sparkle to candle flames or camp fires.
#4: To give it color, add a drop or 2 of a re-inker.
#5: Use it as glue for poly shrink plastic embellishments, beads, feathers, and bows. It is very strong, great for adding hard to hold magnets, pin backs, and wire to your stamped projects. Be sure to let it dry completely before handling. To make marble magnets purchase those glass marbles/pebbles that have a flat side to them. Then use the circle punch to create the perfect shape to place behind these see-through marbles. Stamp desired image on the card stock circle and color it in. Apply Crystal Effects to the flat marble and then press onto the stamped circle. (Applying the Crystal Effects to the marble instead of the stamped image will keep the image colors from smearing.) Apply a bit more Crystal Effects to the back of the circle and then attach the magnet to it.
#6: Use it to glue vellum to card stock. It won�t show through. I�ve found the best way to keep vellum from wrinkling or "popping up" after application of CE is to apply it with a fingertip or Q-tip applicator in a very thin coat, not just straight from the bottle.
#7: Make Glitter Gloss.
Materials: Crystal Effects, Ultra-fine Glitter, Old paint brush
Directions: Okay, this is really simple. Squirt out some Crystal Effects onto a scrap of acetate or other non-porous surface. Using a toothpick, stir in some glitter until you have the consistency you want.
To Use: Using a paintbrush, brush the glitter gloss onto your stamped art, stamped tiles, polymer beads, etc. When dry, it gives a glossy and sparkly look to your art. Try using this to add glitter to snowcaps made with liquid applique, add highlights to ornaments, Valentine hearts, etc. Anywhere that you want to add a bit of sparkles. You can also use this same homemade glitter gloss on hand painted ceramics.
#8: Simulate dew on a petal by adding little droplets to flowers. You can also add it to the petals of actual dried flowers or fake plastic ones. This really does look like dew and you won't spend a fortune buying designers ones from stores.
#9: Use the applicator tip to apply a thicker layer of Crystal Effects to "select elements" of your design to add emphasis. Apply a second or third coat if your first layer was not standing up off your paper enough to please you. Some ideas are to apply it to leaves, flower petals, insects, teacup, umbrella, window, eyeglasses, Christmas ornaments.
#10: Highlight only special lines on an image such as the squiggle on Fruit Medley. Use the Strawberry and stamp it in red. Stamp the inside of the strawberry red as well. Use the Crystal Effects to outline the squiggle line that is used to fill the strawberry.
#11: Use it to create a stained glass window effect. Stamp image on window sheets, using AP pads (AP will dry on plastic without embossing), let dry thoroughly (over night is best), then use the tip of the CE bottle to move it (CE) around to cover each individual area with a thin layer of the CE. While it is still wet, dump on glitter. Only do one color of glitter at a time. let each area dry at least an hour before going to the next color.
#12: Use it for "fray check" on the ends of your ribbon after you have cut them to the desired length.
#13: Place on top of Radiant Pearls and get a pearlescent shimmer and shine.
#14: Fill in things after you've embossed and colored for a real "pop"!
#15: Use it to re-glue any stamps that have either come unmounted from the foam or that you took off the wood block because you wanted to trim and re-mount.
**Most of all . . . experiment!!**
Cautions:
*The only complaint I have heard about this product from other stampers is the air bubble that can happen when this product is not applied just "so." To alleviate this problem apply slowly and do not lift tip from surface during application until you are finished. This way there are no air bubble being "blown in" to your work.
*Do not use heat tool to speed dry time. It becomes extremely "bubbley" and unattractive.
* Tip may become clogged. To prevent this you can unscrew cap and rinse with warm water, dry and replace cap. You can also use a piece of plastic coated wire in the tip as you seal it. This will keep an open pathway and it won�t clog. Be sure to wipe tip of the bottle first so the pin won�t be "glued in." Also be sure you don�t use a standard straight pen because over time it will rust and color you CE to a wonderful "rust" color. (Unfortunately I learned that the hard way.)
__________________ Proud to be a Stampin' Up! Demo... and a "Rubber Mutt"
I am just surfing through the web site reading and reading. Just before I sat down I tried a technique I read on SCS recently. I have many, many glass votive holders left from daughter's wedding in June. I stamped with black Staz On on the side of the votive holder. I then used Crystal Effects colored with reinker to paint. It was so easy, and it looks really nice.
Thanks so much for sharing these wonderful tips for crystal effects. I just bought some for the first time...your instructions will come in very handy!
Crystal Effects
Thank You!!
