Tip re: Crystal Effects

Novell · 05-25-2005, 10:17 PM

I was getting really frustrated with the horrible clogging I was experiencing with my Crystal Effects bottle. Well, the last time I put the cap back on while the tip was still pointed down. The next time I used it, no clogs!!!

mamie114 · 05-26-2005, 03:27 AM

I have to try this! I hate when it clogs.

jenny4wheel · 05-26-2005, 03:36 AM

I'll have to try this. I was having trouble with clogs too, so the last time I put it up I stuck a straight pin in it and left it. That's what you do with caulk using a nail, I figured it would work. The **bleeping** pin RUSTED in the CE! I was able to remove the nozzle and clean out the rusty crud and the rest of my CE was uneffected, but now need a new way to keep it from clogging.

stampfunny · 05-26-2005, 05:10 AM

I will definitely try doing that as well. I can have mine out on the table, use it, replace the lid, and 5 minutes letter use it again and EACH TIME it is clogged! Thanks for the info and I hope it works for me as well!

guatelicia · 05-26-2005, 05:47 AM

I usually tap it on the table a couple of times to make sure that the CE goes down, then I squeeze the bottle a tlittle bit, and the air pushes out the last bit of CE (usually it makes a buble). It has never clogged!